Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 93 / 216

Proline Cubemass C 300 Commissioning
Hauser 93
Configuring the frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
‣
Pulse/frequency/switch output
1 to n
Operating mode →  93
Terminal number →  93
Signal mode →  93
Assign frequency output →  94
Minimum frequency value →  94
Maximum frequency value →  95
Measuring value at minimum
frequency →  95
Measuring value at maximum
frequency →  95
Failure mode →  95
Failure frequency →  95
Invert output signal →  95
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output. • Pulse
• Frequency
• Switch Pulse
Terminal number – Shows the terminal numbers
used by the PFS output
module. • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3) –
Signal mode – Select the signal mode for the
PFS output. • Passive
• Active
*
• Passive NE
Passive