Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 141 / 216

Proline Cubemass C 300 Operation
Hauser 141
Totalizer value 1 to n →  141
Reset all totalizers →  141
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Control Totalizer 1 to n A process variable is selected
in the
Assign process variable
parameter (→  115) of the
Totalizer 1 to n submenu.
Control totalizer value. • Totalize
• Reset + hold
*
• hold
*
• Reset + totalize
• totalize
*
• Hold
*
Totalize
Preset value 1 to n A process variable is selected
in the
Assign process variable
parameter (→  115) of the
Totalizer 1 to n submenu.
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the
Unit totalizer
parameter (→  115).
Signed floating-point
number Country-specific:
• 0 kg
• 0 lb
Totalizer value 1 to n A process variable is selected
in the
Assign process variable
parameter (→  115) of the
Totalizer 1 to n submenu.
Displays the current totalizer
counter reading. Signed floating-point
number –
Reset all totalizers – Reset all totalizers to 0 and
start. • Cancel
• Reset + totalize Cancel
* Visibility depends on order options or device settings
11.6.1 Function scope of "Control Totalizer" parameter
Options Description
Totalize The totalizer is started or continues running.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
hold
1)
The totaling process is stopped and the totalizer is set to its defined start value
from the
Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
totalize
1)
The totalizer is set to the defined start value in the Preset value parameter and the
totaling process is restarted.
Hold Totalizing is stopped.
1) Visible depending on the order options or device settings
11.6.2 Function scope of the "Reset all totalizers" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.