Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 75 / 216

Proline Cubemass C 300 System integration
Hauser 75
Parameter Description Selection / User entry Factory setting
Burst variable 0 For HART command 9 and 33: select the
HART device variable or the process variable. • Mass flow
• Volume flow
• Corrected volume flow
*
• Density
• Reference density
*
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Target mass flow
*
• Carrier mass flow
*
• Concentration
*
• Totalizer 1
• Totalizer 2
• Totalizer 3
• HBSI
*
• Target volume flow
*
• Carrier volume flow
*
• Target corrected volume
flow
*
• Carrier corrected volume
flow
*
• Sensor index coil asymmetry
• Test point 0
• Test point 1
• HART input
• Percent of range
• Measured current
• Primary variable (PV)
• Secondary variable (SV)
• Tertiary variable (TV)
• Quaternary variable (QV)
• Not used
Volume flow
Burst variable 1 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 2 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 3 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 4 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 5 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 6 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 7 For HART command 9: select the HART
device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst trigger mode Select the event that triggers burst message
X. • Continuous
• Window
*
• Rising
*
• Falling
*
• On change
Continuous
Burst trigger level Enter the burst trigger value.
Together with the option selected in the
Burst trigger mode parameter the burst
trigger value determines the time of burst
message X.
Signed floating-point number –