Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 101 / 216

Proline Cubemass C 300 Commissioning
Hauser 101
Navigation
"Setup" menu → Double pulse output
‣
Double pulse output
Signal mode →  101
Master terminal number →  101
Assign pulse output →  101
Measuring mode →  101
Value per pulse →  101
Pulse width →  101
Failure mode →  102
Invert output signal →  102
Parameter overview with brief description
Parameter Description Selection / User interface /
User entry
Factory setting
Signal mode Select the signal mode for the double pulse
output. • Passive
• Active
*
• Passive NE
Passive
Master terminal number Shows the terminal numbers used by the
master of the double pulse output module. • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3) –
Assign pulse output Select process variable for pulse output. • Off
• Mass flow
• Volume flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
*
• Target volume flow
*
• Carrier volume flow
*
• Target corrected volume
flow
*
• Carrier corrected volume
flow
*
Off
Measuring mode Select measuring mode for pulse output. • Forward flow
• Forward/Reverse flow
• Reverse flow
• Reverse flow compensation Forward flow
Value per pulse Enter measured value at which a pulse is
output. Signed floating-point number Depends on country and
nominal diameter
Pulse width Define time width of the output pulse. 0.5 to 2 000 ms 0.5 ms