Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 167 / 216

Proline Cubemass C 300 Diagnostics and troubleshooting
Hauser 167
Info number Info name
I1635 Reset to delivery settings
I1639 Max. switch cycles number reached
I1643 Custody transfer logbook cleared
I1649 Hardware write protection activated
I1650 Hardware write protection deactivated
I1651 Custody transfer parameter changed
I1712 New flash file received
I1725 Sensor electronic module (ISEM) changed
I1726 Configuration backup failed
12.11 Resetting the measuring device
The entire device configuration or some of the configuration can be reset to a defined state
with the Device reset parameter (→  126).
12.11.1 Function scope of "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to the customer-specific value. All other parameters are reset to the factory setting.
Restart device The restart resets every parameter with data stored in volatile memory (RAM) to
the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Restore S-DAT backup Restores the data that is saved on the S-DAT. Additional information: This function
can be used to resolve the memory issue "083 Memory content inconsistent" or to
restore the S-DAT data when a new S-DAT has been installed.

This option is displayed only in an alarm condition.
12.12 Device information
The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag →  168
Serial number →  168
Firmware version →  168
Device name →  168