Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 79 / 216

Proline Cubemass C 300 Commissioning
Hauser 79
‣
Partially filled pipe detection →  107
‣
Advanced setup →  108
10.4.1 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a
unique designation using the Device tag parameter and thus change the factory setting.
1 XXXXXXXXX
A0029422
 32 Header of the operational display with tag name
1 Tag name
Enter the tag name in the "FieldCare" operating tool →  68
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /). Promass
10.4.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
The number of submenus and parameters can vary depending on the device version.
Certain submenus and parameters in these submenus are not described in the
Operation Instructions. Instead a description is provided in the Special Documentation
for the device (→ "Supplementary documentation" section).
Navigation
"Setup" menu → System units
‣
System units
Mass flow unit →  80
Mass unit →  80
Volume flow unit
→  80
Volume unit →  80