Proline Cubemass C 300
Safety instructions
Hauser
11
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity. Hauser
confirms this by affixing the CE mark to the device.
Furthermore, the device meets the legal requirements of the applicable UK regulations
(Statutory Instruments). These are listed in the UKCA Declaration of Conformity along
with the designated standards.
By selecting the order option for UKCA marking, Hauser confirms a successful
evaluation and testing of the device by affixing the UKCA mark.
Contact address Hauser UK:
Hauser Ltd.
Floats Road
Manchester M23 9NF
United Kingdom
2.6
IT security
Our warranty is valid only if the product is installed and used as described in the Operating
Instructions. The product is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the product and associated
data transfer, must be implemented by the operators themselves in line with their security
standards.
2.7
Device-specific IT security
The device offers a range of specific functions to support protective measures on the
operator's side. These functions can be configured by the user and guarantee greater in-
operation safety if used correctly. An overview of the most important functions is provided
in the following section:
Function/interface
Factory setting
Recommendation
Write protection via hardware write
protection switch → 11
Not enabled
On an individual basis following risk assessment
Access code
(also applies for Web server login or
FieldCare connection) → 12
Not enabled
(0000)
Assign a customized access code during
commissioning
WLAN
(order option in display module)
Enabled
On an individual basis following risk assessment
WLAN security mode
Enabled (WPA2-
PSK)
Do not change
WLAN passphrase
(password) → 12
Serial number
Assign a customized WLAN passphrase during
commissioning
WLAN mode
Access point
On an individual basis following risk assessment
Enabled
On an individual basis following risk assessment
CDI-RJ45 service interface → 13
–
On an individual basis following risk assessment
2.7.1
Protecting access via hardware write protection
Write access to the parameters of the device via the local display, Web browser or
operating tool (e.g. FieldCare, DeviceCare) can be disabled via a write protection switch
Содержание Proline Cubemass C 300
Страница 215: ......
Страница 216: ...www addresses endress com 71574975 71574975...