Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 114 / 216

Commissioning Proline Cubemass C 300
114 Hauser
Parameter overview with brief description
Parameter Description Selection / User interface Factory setting
Process conditions Ensure process conditions as follows. • Tubes are completely filled
• Process operational pressure
applied
• No-flow conditions (closed
valves)
• Process and ambient
temperatures stable
–
Progress Shows the progress of the process. 0 to 100 % –
Status Shows the status of the process. • Busy
• Failed
• Done –
Abort cause Indicates why the wizard was aborted. • Check process conditions!
• A technical issue has
occurred
–
Root cause Shows the diagnostic and remedy. • Zero point too high. Ensure
no-flow.
• Zero point is unstable.
Ensure no-flow.
• Fluctuation high. Avoid 2-
phase medium.
–
Reliability of measured zero point Indicates the reliability of the zero point
measured. • Not done
• Good
• Uncertain –
Additional information Indicate whether to display additional
information. • Hide
• Show Hide
Zero point measured Shows the zero point measured for the
adjustment. Signed floating-point number –
Zero point standard deviation Shows the standard deviation of the zero
point measured. Positive floating-point number –
Select action Select the zero point value to apply. • Keep current zero point
• Apply zero point measured
• Apply factory zero point
*
Keep current zero point
* Visibility depends on order options or device settings
10.5.4 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable →  115
Unit totalizer 1 to n →  115
Totalizer operation mode →  115
Failure mode →  115