Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 85 / 216

Proline Cubemass C 300 Commissioning
Hauser 85
Parameter Description User interface / Selection /
User entry
Factory setting
Apply I/O configuration Apply parameterization of the freely
configurable I/O module. • No
• Yes No
I/O alteration code Enter the code in order to change the I/O
configuration. Positive integer 0
* Visibility depends on order options or device settings
10.4.5 Configuring the current input
The "Current input" wizard guides the user systematically through all the parameters that
have to be set for configuring the current input.
Navigation
"Setup" menu → Current input
‣
Current input 1 to n
Terminal number →  85
Signal mode →  85
0/4 mA value →  85
20 mA value →  85
Current span →  86
Failure mode →  86
Failure value →  86
Parameter overview with brief description
Parameter Prerequisite Description User interface /
Selection / User
entry
Factory setting
Terminal number – Shows the terminal numbers
used by the current input
module. • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3) –
Signal mode The measuring device is not
approved for use in the
hazardous area with type of
protection Ex-i.
Select the signal mode for the
current input. • Passive
• Active
*
Active
0/4 mA value – Enter 4 mA value. Signed floating-point
number 0
20 mA value – Enter 20 mA value. Signed floating-point
number Depends on country
and nominal
diameter