Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 84 / 216

Commissioning Proline Cubemass C 300
84 Hauser
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Pressure value In the Pressure compensation
parameter, the Fixed value
option is selected.
Enter process pressure to be
used for pressure correction. Positive floating-
point number 1.01325 bar
External pressure In the Pressure compensation
parameter, the External value
option or the Current input
1…n option is selected.
Shows the external process
pressure value. –
* Visibility depends on order options or device settings
10.4.4 Displaying the I/O configuration
The I/O configuration submenu guides the user systematically through all the parameters
in which the configuration of the I/O modules is displayed.
Navigation
"Setup" menu → I/O configuration
‣
I/O configuration
I/O module 1 to n terminal numbers →  84
I/O module 1 to n information →  84
I/O module 1 to n type →  84
Apply I/O configuration →  85
I/O alteration code →  85
Parameter overview with brief description
Parameter Description User interface / Selection /
User entry
Factory setting
I/O module 1 to n terminal numbers Shows the terminal numbers used by the I/O
module.
• Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2)
• 22-23 (I/O 3) –
I/O module 1 to n information Shows information of the plugged I/O
module. • Not plugged
• Invalid
• Not configurable
• Configurable
• HART –
I/O module 1 to n type Shows the I/O module type. • Off
• Current output
*
• Current input
*
• Status input
*
• Pulse/frequency/switch
output
*
• Double pulse output
*
• Relay output
*
Off