Dinli DL-702 2008, Руководство по обслуживанию

Страница: 194 / 306

【
7-14
】
COOLING AND LUBRICATION SYSTEM
Water Pump
Removal and Disassembly
● Remove the left mud guard.
● Drain engine coolant.
● Drain engine oil.
● Remove the water hoses.
● Remove the water pump cover [1].
● Remove the circlip [1] and water pump drive gear [2].
● Remove the impeller shaft pin [3] and washer [4].
NOTE
Before draining engine coolant, inspect engine coolant leakage
between the water pump and crankcase. If engine oil is leaking,
visually inspect the oil seal and O ‐ ring. If engine coolant is
leaking, visually inspect the mechanical seal and seal ring.
CAUTION
In order to remove or disassemble the water pump, it is
necessary to disassemble the recoil starter [1] and engine left
crankcase cover [2].
2
1
3
4
1
1
2