Dinli DL-702 2008, Руководство по обслуживанию

Страница: 14 / 306

【
1-9
】
GENERAL INFORMATION
Brake Fluid
● Specification and classification: DOT 4
WARNING
○
Since the brake system of this vehicle is filled with a glycol ‐ based brake fluid by the manufacturer, do
not use or mix different types of fluid such as silicone ‐ based and petroleum ‐ based fluid for refilling the
system, otherwise serious damage will result.
○
Do not use any brake fluid taken from old or used or unsealed containers.
○
Never re ‐ use brake fluid left over from a previous servicing, which has been stored for a long period.
Engine Coolant
● Use an anti ‐ freeze/engine coolant compatible with an aluminum radiator, mixed with distilled water only.
Water For Mixing
● Use distilled water only. Water other than distilled water can corrode and clog the aluminum radiator.
Anti ‐ Freeze/Engine Coolant
● The engine coolant performs as a corrosion and rust inhibitor as well as anti ‐ freeze. Therefore, the engine
coolant should be used at all times even though the atmospheric temperature in your area does not go
down to freezing point.
● Dinli recommends the use of engine coolant is compatible with an aluminum radiator.
Liquid Amount of Water/Engine Coolant
Solution capacity (total): Approx. 1950 ml
● For engine coolant mixture information, refer to cooling system section in page 7 ‐ 2.
CAUTION
Mixing of anti ‐ freeze/engine coolant should be limited to 70%. Mixing beyond it would reduce its
efficiency. If the anti ‐ freeze/engine coolant mixing ratio is below 50%, rust inhabiting performance is
greatly reduced. Be sure to mix it above 50% even though the atmospheric temperature does not go down
to the freezing point.