Dinli DL-702 2008, Руководство по обслуживанию

Страница: 175 / 306

ENGINE
【
6-65
】
● Hold each piston ring with properly position, insert the piston into
the cylinder.
Piston Ring Clip
● Tighten the cylinder base nuts.
CAUTION
When installing the cylinder and cylinder head, pull the cam
chain upward, or the chain will be caught between the crankcase
and cam drive sprocket.
● Install the cam chain guide [1].
● Fit the dowel pins [2] and new cylinder head gasket [3].
2
1
CAUTION
Use a new gasket to prevent gas leakage.
3
● Install the cylinder head.
● Tighten the cylinder head bolts (M10) [1] in ascending order of
numbers to the specified torque.
1
Tightening Torque: Initial 25 N ‐ m (2.5 kgf ‐ m, 18.0 lb ‐ ft)
Final 37 N ‐ m (3.7kgf ‐ m, 27.0 lb ‐ ft)
● Tighten the cylinder head bolts (M6) [2] to the specified torque.
Tightening Torque: 11 N ‐ m (1.1 kgf ‐ m, 8.0 lb ‐ ft)
2