Dinli DL-702 2008, Руководство по обслуживанию

Страница: 253 / 306

【
9-15
】
PERIODIC MAINTENANCE
Differential Gear Oil Inspection
●
Place the vehicle on level ground.
●
Remove the oil level plug [1] and oil filler plug [2], and inspect the
oil level. If the oil level is below the level hole, add fresh oil until
oil flows from the level hole.
●
Tighten the oil level plug [1] and oil filter plug [2] to the specified
torque.
Differential Gear Oil Replacement
● Place the vehicle on level ground.
● Remove
the front under protector. (See Body chapter)
● Place an oil pan below the differential gear case.
● Drain oil by removing the oil drain plug [3], oil fil
ler plug [2] and
oil level plug [1].
● Tighten the oil drain plug [3] to the specified torque and pour
fresh oil through the oil filter hole until it overflows from the oil
level hole.
● Tighten the oil level plug [1] and oil fil
ler plug [2] to the specified
torque.
●
Install the front under protector.
Differential Gear Oil Specification:
Hypoid gear oil SAE#80W-90, API grade GL-5
Front differential gear oil capacity: 150 ml
Tightening Torque:
Front differential gear oil level plug :
9 N-m (0.9 kgf-m, 6.5 ft-lb)
Front differential gear oil drain plug :
32 N-m (3.2 kgf-m, 23.0 ft-lb)
Front differential gear oil filler plug :
35 N-m (3.5 kgf-m, 25.5 ft-lb)
Inspect every 2000 km (100 hours, 6 months).
Replace every two years.
NOTE
Use hypoid gear oil SAE#80, API grade GL-5, if the vehicle is
ridden where the ambient temperature is below 0℃ (32℃)