Dinli DL-702 2008, Руководство по обслуживанию

Страница: 261 / 306

【
9-23
】
PERIODIC MAINTENANCE
Brakes
Front Brake Pad
●
Remove the front wheels.
●
The extent of front brake pad wear can be checked by observing
the limit line [1] on the side of brake pads. When the wear reaches
the limit line, replace the pads with new ones.
Tightening Torque: 18 N-m (1.8 kgf-m, 13.0 lb-ft)
Rear Brake Pad
●
Remove the rear wheels.
●
The extent of rear brake pad wear can be checked by observing
the limit line [1] on the side of brake pads. When the wear reaches
the limit line, replace the pads with new ones.
Foot Brake Pedal
● Check that the brake pedal [A] is in the correct position as shown.
★ If it is incorrect, adjust the brake pedal position.
● Loosen the nut [A], and turn the bracket [B] until pedal is
correctly positioned.
● Tighten the nut [A].
●
Make sure to tighten the nut [A] securely.
Inspect initially at 200 km (10 hours, 1 month) and every
200 km (10 hours, 1 month) thereafter.
CAUTION
Replace the brake pads as a set, otherwise braking performance
will be adversely affected.
CAUTION
Replace the brake pads as a set, otherwise braking performance
will be adversely affected.
Pedal Position [B]
Standard 72 ~ 80 mm above footrest
NOTE
First adjust the brake pedal, and then adjust the brake lever.
A
B
A
B
1
1