Dinli DL-702 2008, Руководство по обслуживанию

Страница: 255 / 306

【
9-17
】
PERIODIC MAINTENANCE
Engine Coolant
Engine Coolant Level Check
●
Check the engine coolant level by observing the upper and lower
lines on the engine coolant reservoir tank.
●
If the level is below the lower line, add engine coolant until the
level reaches the upper line.
Engine Coolant Replacement
●
Remove the front fender decoration [1] by inserting the opening
stick [2] into the hole to open it.
●
Remove the radiator cap [3] and engine coolant reservoir tank cap
[4].
●
Remove the left footboard.
●
Place a pan below the water pump, and then drain the engine
coolant by removing the drain plug [5].
●
Flush the radiator with fresh water, if necessary.
●
Tighten the drain plug [5] to the specified torque.
Tightening Torque: 13 N-m (1.3 kgf-m, 9.5 lb-ft)
●
Pour the specified engine coolant into the reservoir tank.
Inspect every 1000 km (50 hours, 3 months).
Replace every two years.
WARNING
○
Do not open the radiator cap when the engine is hot, as you
may be injured by escaping hot liquid or vapor.
○
Engine coolant may be harmful if swallowed or if it comes in
contact with the skin or eyes. If engine coolant gets into the
eyes or contacts the skin, flush the eyes or wash the skin
thoroughly, with plenty of water. If engine coolant is
swallowed, induce vomiting and call a physician
immediately.
CAUTION
Use and antifreeze designed for aluminum radiators mixed
with distilled water only.
Water/antifreeze mixture ratio 50:50 – 33:67
NOTE
For engine coolant information, refer to page 7-2.
FULL
ADD
2
1
3
4
5