Dinli DL-702 2008, Руководство по обслуживанию

Страница: 254 / 306

【
9-16
】
PERIODIC MAINTENANCE
Rear Driver Gear Oil
Rear Driver Gear Oil Inspection
● Place the vehicle on level ground.
● Remove the oil level plug [1] and oil filler plug [2], and inspect the
oil level. If the oil level is below the level hole, add fresh oil until
oil flows from the level hole.
● Tighten the oil level plug [1] and oil f
iller plug [2] to the specified
torque.
Rear Driver Gear Oil Replacement
● Place the vehicle on level ground.
● Remove the rear under protector.
(See Body chapter)
● Place an oil pan below the
rear driver gear case.
● Drain oil by removing the oil drain
plug [3], oil filler plug [2] and
oil level plug [1].
● Tighten the oil drain plug [3] to the specified torque and pour
fresh oil through the oil filter hole until it overflows from the oil
level hole.
Tightening Torque: 23 N-m (2.3 kgf-m, 16.5 lb-ft)
●
Tighten both the oil level plug [1] and oil filler plug [2] to the
specified torque.
Oil level plug: 23 N-m (2.3 kgf-m, 16.5 lb-ft)
Oil filter plug: 23 N-m (2.3 kgf-m, 16.5 lb-ft)
●
Install the front under protector.
Rear driver gear oil capacity: 310 ml
Rear driver gear oil specification:
Hypoid gear oil SAE#80W-90, API grade GL-5
Inspect every 2000 km (100 hours, 6 months).
Replace every year.