Digi Connect IT 16, Руководство пользователя

Страница: 548 / 756

User authentication Example user configuration
Digi Connect IT® 16/48 User Guide 548
3. Configure the device to use RADIUS authentication:
a. Click Authentication > Methods .
b. For Add Method , click

to add a new method.
c. For the new method, select RADIUS .
Note If you want other users to authenticate via other authentication methods, you should
include those authentication methods in this list. For example, if you want administrators of
the Connect IT 16/48 to log into the device using local authentication, make sure that
Local
users authentication is included in the Methods list. Otherwise they will not be able to log into
the device.
4. Create the authentication groups.
In this example, we are adding two groups, serialgroup1 and serialgroup2 .
a. In Add Group , type serialgroup1 and click

.
b. Repeat for the second group: For Add Group: , type serialgroup2 and click

.
c. For serialgroup1 :
i. Click Serial access to enable serial access.
ii. Click Serial ports .
iii. For Add Port , click

.
iv. For Port , select Port 1 .
d. For serialgroup2 :
i. Click Serial access to enable serial access.
ii. Click Serial ports .
iii. For Add Port , click

.
iv. For Port , select Port 2 .
v. Click

again.
vi. Select Port 4 .
vii. Click

again.
viii. Select Port 8 .
5. Create the users.
In this example, we are adding two users, serialuser1 and serialuser2 , and adding them to the
groups that we created in the previous step .
a. Click Authentication > Users .
b. In Add User , type serialuser1 and click

.
c. Repeat for the second user: For Add User , type serialuser2 and click

.
d. For serialuser1 :
i. For password , enter password1 .
ii. Click Groups .
iii. For Add Group , click

.
iv. For Group , select serialgroup1 .