Digi Connect IT 16, Руководство пользователя

Страница: 545 / 756

User authentication Example user configuration
Digi Connect IT® 16/48 User Guide 545
iii. Verify that the admin group has Admin access enabled. If not, click Admin access to
enable.
iv. Verify that Access level is set to Full access . If not, select Full access .
7. Click Apply to save the configuration and apply the change.

Command line
1. Configure a user on the RADIUS server:
a. On the ubuntu machine hosting the FreeRadius server, open the
/etc/freeradius/3.0/users file:
$ sudo gedit /etc/freeradius/3.0/users
b. Add a RADIUS user to the users file:
admin1 Cleartext-Password := "password1"
Unix-FTP-Group-Names := "admin"
In this example:
n
The user's username is admin1 .
n
The user's password is password1 .
n
The authentication group on the Connect IT 16/48 device, admin , is identified in the
Unix-FTP-Group-Names parameter.
c. Save and close the users file.
2. Configure a user on the server:
a. On the ubuntu machine hosting the server, open the /etc//tac_plus.conf
file:
$ sudo gedit /etc//tac_plus.conf
b. Add a user to the tac_plus.conf file:
user = admin1 {
name ="Admin1 for TX64"
pap = cleartext password1
service = system {
groupname = admin
}
}
}
In this example:
n
The user's username is admin1 .
n
The user's password is password1 .