Digi Connect IT 16 Скачать руководство пользователя страница 417

Страница: 417 / 756

Services

Configure the device as an NTP server

Digi Connect IT® 16/48 User Guide

417

To limit access to specified IPv6 addresses and networks:

a. Click

IPv6 Addresses

b. For

Add Address

, click



c. For

Address

, enter the IPv6 address or network that can access the device's NTP

service. Allowed values are:

A single IP address or host name.

A network designation in CIDR notation, for example, 2001:db8::/48.

any

: No limit to IPv6 addresses that can access the NTP service.

d. Click



again to list additional IP addresses or networks.

To limit access to hosts connected through a specified interface on the Connect IT
16/48 device:

a. Click

Interfaces

b. For

Add Interface

, click



c. For

Interface

, select the appropriate interface from the dropdown.

d. Click



again to allow access through additional interfaces.

To limit access based on firewall zones:

a. Click

Zones

b. For

Add Zone

, click



c. For

Zone

, select the appropriate firewall zone from the dropdown.

See

Firewall configuration

for information about firewall zones.

d. Click



again to allow access through additional firewall zones.

Note

By default, the access control list for the NTP service is empty, which means that all

downstream hosts connected to the Connect IT 16/48 device can use the NTP service.

6. (Optional) Add upstream NTP servers that the device will use to synchronize its time. The

default setting is

time.devicecloud.com

To change the default value of the NTP server:

a. Click

NTP servers

b. For

Server

, type a new server name.

To add an NTP server:

a. Click

NTP servers

b. For

Add Server

, click



c. For

Server

, enter the hostname of the upstream NTP server that the device will use

to synchronize its time.

d. Click



to add additional NTP servers. If multiple servers are included, servers are

tried in the order listed until one succeeds.

Note

This list is synchronized with the list of servers included with NTP client configuration,

and changes made to one will be reflected in the other. See

Configure the system time

for

more information about NTP client configuration.

7. (Optional) Configure the system time zone. The default is

UTC

Содержание Connect IT 16





















































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Connect IT 16

Отзывы:

Похожие инструкции для Connect IT 16

Бренды по названию

Популярные бренды

Digi Connect IT 16, Руководство пользователя

Результаты поиска

Содержание Connect IT 16

Отзывы:

Похожие инструкции для Connect IT 16

Бренды по названию

Популярные бренды