Routing
IP routing
Digi Connect IT® 16/48 User Guide
200
/network/interface/sfp2
/network/interface/wwan
Current value:
(config network route policy 0)> dst interface
b. Set the interface. For example:
(config network route policy 0)> dst interface
/network/interface/eth1
(config network route policy 0)>
n
address
: Matches the destination IPv4 address to the specified IP address or network.
Set the address that will be matched:
(config network route policy 0)> dst address
value
(config network route policy 0)>
where value uses the format
IPv4_address
[
/
netmask
]
, or
any
to match any IPv4
address.
n
address6
: Matches the destination IPv6 address to the specified IP address or network.
Set the address that will be matched:
(config network route policy 0)> dst address6
value
(config network route policy 0)>
where value uses the format
IPv6_address
[
/
prefix_length
]
, or
any
to match any IPv6
address.
n
mac
: Matches the destination MAC address to the specified MAC address. Set the MAC
address to be matched:
(config network route policy 0)> dst mac
MAC_address
(config network route policy 0)>
11. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
12. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Содержание Connect IT 16
Страница 1: ...Digi Connect IT 16 48 User Guide Firmware version 21 2 ...
Страница 157: ...Interfaces Bridging Digi Connect IT 16 48 User Guide 157 8 Click Apply to save the configuration and apply the change ...
Страница 440: ...Services Configure the ping responder service Digi Connect IT 16 48 User Guide 440 iperf Done ...