Digi Connect IT 16, Руководство пользователя

Страница: 322 / 756

Virtual Private Networks (VPN) NEMO
Digi Connect IT® 16/48 User Guide 322
a. For Type , select the method to determine the local network interface that is used to
communicate with the peer.
n
If Default route is selected, the network interface that is used will be the same as
the default route.
n
If Interface is selected, specify the local network interface.
n
If IP address is selected, type the IP address.
The default is Default route .
12. Click to expand GRE tunnel local endpoint .
a. For Type , select the local endpoint of the GRE endpoint negotiated by NEMO.
n
If Default route is selected, the network interface that is used will be the same as
the default route.
n
If Interface is selected, specify the local network interface.
The default is Default route .
13. Click to expand Local networks .
a. For Add Interface , click

to add a local network to use as a virtual NEMO network
interface.
b. For Interface , select the local interface to use as a virtual NEMO network interface.
Generally, this will be the a Local Area Network (LAN).
c. (Optional) Repeat for additional interfaces.
14. Click Apply to save the configuration and apply the change.

Command line
1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add a NEMO tunnel. For example, to add a NEMO tunnel named nemo_example :
(config)> add vpn nemo nemo_example
(config vpn nemo nemo_example)>