Digi Connect IT 16, Руководство пользователя

Страница: 444 / 756

Applications Configure applications to run automatically
Digi Connect IT® 16/48 User Guide 444
Task two: Configure the application to run automatically
Note This feature does not provide syntax or error checking. Certain commands can render the device
inoperable. Use with care.

WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts .
4. For Add Script , click

.
The schedule script configuration window is displayed.
Scheduled scripts are enabled by default. To disable, click Enable to toggle off.
5. (Optional) For Label , provide a label for the script.
6. For Run mode , select the mode that will be used to run the script. Available options are:
n
On boot : The script will run once each time the device boots.
l
If On boot is selected, select the action that will be taken when the script
completes in Exit action . Available options are:
o
None : Action taken when the script exits.
o
Restart script : Runs the script repeatedly.
o
Reboot : The device will reboot when the script completes.
n
Interval : The script will start running at the specified interval, within 30 seconds after
the configuration change is saved.