Digi Connect IT 16, Руководство пользователя

Страница: 80 / 756

Interfaces Wide Area Networks (WANs)
Digi Connect IT® 16/48 User Guide 80
The default is Automatic .
5. (Optional) Authentication method :
For Authentication method , select one of the following:
n
None : No authentication is required.
n
Automatic : The device will attempt to connect using CHAP first, and then PAP.
n
CHAP : Uses the Challenge Handshake Authentication Profile (CHAP) to authenticate.
n
PAP : Uses the Password Authentication Profile (PAP) to authenticate.
If Automatic , CHAP , or PAP is selected, enter the Username and Password required to
authenticate.
The default is None .
6. To add additional APNs, for Add APN , click

and repeat the preceding instructions.
7. (Optional) To configure the device to bypass its preconfigured APN list and only use the
configured APNs, enable APN list only .
8. Click Apply to save the configuration and apply the change.

Command line
1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, type:
(config)> network interface wwan modem apn 0 apn value
(config)>
where value is the APN for the SIM card.