Digi Connect IT 16 Скачать руководство пользователя страница 356

Страница: 356 / 756

Services

Configure DNS

Digi Connect IT® 16/48 User Guide

356

c. For

Zone

, select the appropriate firewall zone from the dropdown.

See

Firewall configuration

for information about firewall zones.

d. Click



again to allow access through additional firewall zones.

5. (Optional)

Cache negative responses

is enabled by default. Disabling this option may improve

performance on networks with transient DNS results, when one or more DNS servers may
have positive results. To disable, click

Cache negative responses

6. (Optional)

Query all servers

is enabled by default. This option is useful when only some DNS

servers will be able to resolve hostnames. To disable, click

Query all servers

7. (Optional)

Rebind protection

, if enabled, prevents upstream DNS servers from returning

private IP addresses. To enable, click

Rebind protection

8. (Optional)

Allow localhost rebinding

is enabled by default if

Rebind protection

is enabled.

This is useful for Real-time Black List (RBL) servers.

9. (Optional) To add additional DNS servers:

a. Click

DNS servers

b. For

Add Server

, click



c. (Optional) Enter a label for the DNS server.

d. For

DNS server

, enter the IP address of the DNS server.

Domain

restricts the device's use of this DNS server based on the domain. If no domain are

listed, then all queries may be sent to this server.

10. (Optional) To add host names and their IP addresses that the device's DNS server will resolve:

a. Click

Additional DNS hostnames

b. For

Add Host

, click



c. Type the

IP address

of the host.

d. For

Name

, type the hostname.

11. Click

Apply

to save the configuration and apply the change.



Command line

1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

Содержание Connect IT 16





















































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Connect IT 16

Отзывы:

Похожие инструкции для Connect IT 16

Бренды по названию

Популярные бренды

Digi Connect IT 16, Руководство пользователя

Результаты поиска

Содержание Connect IT 16

Отзывы:

Похожие инструкции для Connect IT 16

Бренды по названию

Популярные бренды