Daikin GYEQ20AN, Руководство по обслуживанию

Страница: 126 / 245

Troubleshooting the Outdoor Unit SiAUY361411EA
115 Troubleshooting
1.3 RUN Mode
• When you press or (hereafter only is indicated for
simplicity) button while SW1 is in the RUN position and the total operated hours are displayed,
RUN mode is activated.
("1.___________" appears on the LCD.)
• When terminating the RUN mode, press the button repeatedly until the total
operated hours are displayed. ([Caution] Be sure to operate as above when exiting from RUN
mode.)
• RUN mode has four levels from 1 to 4. Use the and buttons to shift
between these levels.
• You can switch the channels using the and buttons.
Table 4.3/ List of RUN mode menu items
∗
While in RUN mode, the display is automatically released from the checker five hours after the
termination of the operation, and it returns to showing the total operated hours.
Level 1 Level 2 Level 3 Level 4
CH
items
1. Outdoor
unit
01. Outdoor unit data Outdoor unit data display
02. Actuator operation
status 1 Actuator operation status
1 display
03. Actuator operation
status 2 Actuator operation status
2 display
04. Not used
05. Not used
2. Special
operation
Special operation mode
Special operation mode
setting
3. Indoor
unit
01. Indoor unit detail Indoor unit No.
Indoor unit information
display
02. Indoor unit
thermostat ON status Indoor unit thermostat
ON status display
03. Indoor unit remote
controller ON status
Indoor unit remote
controller ON status
display
4. Item
display
01. ON/OFF unit
(memory switch)
Each item ON/OFF display
02. Data Units Item display
NEXT
ENTER
NEXT
BACK
BACK
NEXT
UP
DOWN