Daikin GYEQ20AN, Руководство по обслуживанию

Страница: 188 / 245

Inspecting the Outdoor Unit SiAUY361411EA
177 Parts Inspection
„
Inspecting the ignition coil
Inspect the ignition coil by measuring the resistance between its primary side terminals.
[Caution]
• Check if the plug caps and cords are correctly connected.
• Check if the primary side terminal connectors are in perfect contact.
„
Inspecting the crank pulse sensor
Inspect the crank pulse sensor by measuring the resistance between its terminals. Check the
sensor and flywheel for any gap.
„
Inspecting the cam pulse sensor
Inspect the cam pulse sensor by measuring the resistance between its terminals.
[Note] No gap adjustment is required for the cam pulse sensor.
Measuring points Measured value
Between terminals 0.7
Ω
Measuring points Measured value
Between terminals 515±35
Ω
Gap between sensor and flywheel 0.7 to 1.1 mm
∗
Make sure that the starter cable is not running close.
If so, fix it using clamps to keep a distance.
Measuring points Measured value
Between terminals 515±35
Ω
Coupler
Part No., NGK item No.
Primary power
output (V-)
Primary power
output (V+)
Secondary power
output
V
2
out
023461-00E
025945-00E01
025946-00X