Daikin GYEQ20AN, Руководство по обслуживанию

Страница: 87 / 245

SiAUY361411EA Test Run Manual
Device Overview 76
0FGHP-EN0841 DGJ002
– 9 –
2 How to Perform a Test Run
How to Use the PCB Checker
z You can use the PCB switch SW1 to switch the
checker function between the RUN and STOP modes.
RUN Mode
z When pressing NEXT or ENTER (hereafter shown NEXT as only) button while SW 1 is in the
RUN position and the total operated hours are displayed, RUN mode starts. (The display shows
"1.___________")
z
To leave the RUN mode, press the BACK button repeatedly until the total operated hours are
displayed. (Caution: Be sure to obey the above instructions when terminating the RUN mode.)
z
The RUN mode has four levels from 1 to 4. Use the BACK and NEXT buttons to switch between
these levels.
z The channels are shifted using UP
and DOWN buttons.
Level 1 Level 2 Level 3 Level 4
CH items
1. Outdoor unit
01. Outdoor unit data Outdoor unit data display
02. Actuator operation status 1
Actuator operation status 1
display
03. Actuator operation status 2
Actuator operation status 2
display
04. Unused
05. Unused
2. Special operation Special operation mode Special operation mode setting
3. Indoor unit
01. Indoor unit detailed information Indoor unit No.
I n d o o r u n i t i n f o r m a t i o n
display
02. Indoor unit thermostat ON
I n d o o r u n i t t h e r m o s t a t O N
status display
03. Indoor unit remote controller
ON
Indoor unit remote controller
ON status display
4. Item display
01. ON/OFF Unit (Memory Switch) Each item ON/OFF display
02. Data Units Item display
* While in RUN mode, the display is automatically released from the checker five hours after the termination of the operation, and it returns
to the total operated hours displays.
Ƒ6:DQGSXVKEXWWRQIXQFWLRQV
Button name Function
UP Selects a different channel (CH)
DOWN Selects a different channel (CH)
NEXT Moves to the next level
BACK Returns to the previous level
ENTER Saves settings (moves to the next
menu)
E N T E R ( h o l d
down)
C l e a r s / C h a n g e s t h e s e t t i n g s t o
adjustable
SW1 Switches between RUN and STOP
modes