Daikin GYEQ20AN, Руководство по обслуживанию

Страница: 217 / 245

SiAUY361411EA Replacement of Primary Parts
Replacement of Parts 206
6. Remove the engine mount on the front left side.
7. Remove the V ribbed belt. (See
page 213 [1.2 Periodic Inspection Procedure for the
Outdoor Unit] .)
8. Place wooden bases underneath the compressor.
(Use two wooden bases sized approximately 45 × 700 mm.)
∗
Fit the compressor with the wooden bases from beneath the front comp bracket to the
back comp bracket.
9. Remove all the harnesses and hoses (cooling, intake, exhaust, fuel, and lubricating oil) that
are connected to the engine.
10.Remove the air cleaner and drain filters.
11.
∗
Remove the front comp bracket and remove the bolts that anchor the back comp bracket
to the engine.
12.Remove the engine mount on the front right side.
13.Pull out the engine.
∗
Take care to prevent the compressor from slipping down from the wooden bases when
pulling it out. Once you have pulled out the compressor, take care not to drop it.
[Reverse the steps above to install the replacement]
∗
Make sure that the types and sizes (length in particular) of the bolts and nuts are correct.
2.2 Replacing the Compressor
Fig. 6.3/ Compressor periphery structure diagram
023433-00E01
Back comp support
Back comp bracket
Upper comp bracket
Front comp bracket
Front left side engine mount
Guard M10 x 30
Guard M10 x 16
Large round M10 x 30
Engine fixture
spring M10 x 25