Daikin GYEQ20AN, Руководство по обслуживанию

Страница: 134 / 245

Troubleshooting the Outdoor Unit SiAUY361411EA
123 Troubleshooting
1.4.3 Configure Items
„
ON/OFF unit (memory switch)
(1) Enter STOP mode, select CH [3] in Level 1 and press . (2) Select CH [01] in Level
2 and press . (3) Select the CH (Table 4.12) of the item you want to change in Level 3
and press . (4) Select the number (Table 4.12) of the item you want to change in
Level 4 and press . (5) Change the ON/OFF value using and , then
press to save the new value.
For CH55, No. 1, 2 and 3 are cleared when you set the value to "ON" and they are reset to OFF
when you exit from STOP mode after setting them to ON. However, this does not mean the
clear setting is disabled.
Reset the power supply after changing the settings.
Table 4.12/ (List of ON/OFF unit items)
∗
If your selected channel contains an item that is not supported by the unit model, the LCD
displays nothing or "-".
∗
Items not listed above are not used. Do not attempt to change any unlisted settings.
(Note 1)Cooling/heating performance is more or less sacrificed for the quiet mode or energy
saving mode, possibly resulting in "Cannot Get Cool/Warm" complaints from end users.
(Note 2)The GVM aging correction amount is cleared at the same time.
(Note 3)Be careful that the outdoor fan may turn while the unit is stopped.
(Note 4)Set when the outdoor unit is installed in a location higher than the indoor unit, the
difference in levels between the indoor units is 9 m or higher, and the ratio of the bottom
indoor unit is 50% or less.
NEXT
NEXT
NEXT
NEXT UP DOWN
ENTER
CH No. Item Content
01
3
Support for facility-use/
outdoor air processing
indoor unit
ON: when connecting a facility-use/outdoor air processing indoor unit /
OFF: normal (factory default: OFF)
4
Quiet cooling mode
(Note 1)
OFF Normal operation
mode
(factory default)
ON
Quiet mode
operation
ON
Super-quiet mode operation
5 OFF OFF ON
6
Quiet heating mode
(Note 1)
OFF Normal operation
mode
(factory default)
ON
Quiet mode
operation
ON
Super-quiet mode operation
7 OFF OFF ON
02 7
Quiet mode external
signal ON: quiet mode turned ON/OFF via an external signal (option) / OFF: normal (factory
default: OFF)
03 3
High static pressure
support
ON: enabled / OFF: disabled (factory default: OFF)
04
4
Energy saving cooling
mode (Note 1)
ON: enabled / OFF: disabled (factory default: OFF)
6
Energy saving heating
mode (Note 1)
ON: enabled / OFF: disabled (factory default: OFF)
09
0
Defrosting
OFF
Normal defrosting
(factory default)
ON
Reinforced defr stop
defrosting
OFF Stop defrosting
only
1 OFF OFF ON
2
Reinforced defrosting
interval
OFF
4 hours
(factory default)
ON
Always not
established
OFF
2 hours
ON
8 hours
3 OFF OFF ON ON
10
2 Air Guard setting OFF: no / ON: yes (factory default: OFF)
4
Heating eccentric flow
setting (Note 4)
OFF: disabled / ON: enabled (factory default: OFF)
13
4
Periodic inspection
reminder
OFF Reminder: ON /
Energy saving: ON
(factory default)
ON Reminder: OFF
Energy saving:
OFF OFF Reminder: ON
Energy saving:
OFF
ON
Do not use this
setting.
5 OFF OFF ON ON
14
0
Snow sensor support
(Note 3)
OFF: disabled / ON: enabled (factory default: OFF)
1
Snow sensor wait time
setting (in minutes)
OFF
50
(factory default)
ON
30
OFF
20
ON
10
2 OFF OFF ON ON
55
1
Clear GVM initial
correction amount
ON: clear / OFF: normal (normally OFF: turned ON only when clearing the value.)
2
Clear GVM aging
correction amount
ON: clear / OFF: normal (normally OFF: turned ON only when clearing the value.)
3
Clear elapsed time
since last maintenance
(Note 2)
ON: clear / OFF: normal (normally OFF: turned ON only when clearing the value.)