CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 75 / 359

CCI.Cam
CCI.Cam
– Operation
12
4.3.1 Activate/deactivate automatic mode
If you do not want to change the display of the camera images manually, you can
activate automatic mode. The display will then automatically switch to the different
camera images at regular intervals.
To switch the automatic camera switching on or off, proceed as follows:
1. Press the "Switch on automatic camera switching" button (F10) on the
touchscreen or "Switch off automatic camera switching" (F10) if this is already
switched on.
Note
If you are using a multiplexer , automatic camera switching can only be turned on if
several camera images have been activated for automatic mode (see chapter
4.4.2.1).
Note
It is possible to select the camera images amongst which automatic switching
takes place (see chapter 4.4.2.1) and to set the time interval for switching of the
camera images (see chapter 4.4.1).
4.3.2 Show camera image
To show the image from a specific camera, proceed as follows:
1. In the touchscreen , press on the button or the function key, to which the
desired camera image is assigned (see chapter 4.4.1.1).
→ The display switches to the camera image.
Note
You can then also manually change the camera image, if you use automatic mode.
After the specified time interval, the display changes to the next camera image.