CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 274 / 359

CCI.Command
– Operation
31
Delay times
The delay times describe the time delay between the command and the actual
activation of a section (e.g. during spraying, the time from the command: "Switch
on section", until when the agent is actually applied).
There is a switch-on and a switch-off delay .
4.3.3.4 Enter delay times
Note
If the delay times are transferred from the implement, the buttons are greyed out.
Manual entry is not possible.
The implement delay times are displayed in the Section geometry view (see
chapter 4.3.3.1).
To change the delay times , the implement operation must be called up. You can
find more information in the operating instructions for your implement.
To enter the delay times , proceed as follows:
1. In the touchscreen press on the buttons "Switch-on delay" (button 3) and
"Switch-off delay" (button 4) and enter the times that must be adhered to
before individual selections are switched on or off.
2. Confirm your entry with "OK".
Note
Values between 0.00 and 10.00 seconds are valid for the Delay times .