CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 185 / 359

CCI.Control
CCI.Control
– Troubleshooting
96
5.2 Error messages
The following overview shows error messages in CCI.Control, their possible cause
and how to rectify them:
Error Possible cause Rectification
Export is aborted, since no
flash drive found. No flash drive plugged in. Plug in flash drive.
Preview cannot be created. ISO-XML file corrupted or too
large to create a preview. -
Import was interrupted
because no flash drive was
found. No flash drive plugged in. Plug in flash drive.
No active implement. No active
implement found by the
control. Do you want to start
the task anyway? No implement with task
controller functionality is
connected. Activate or connect a task-
controller-compatible
implement.
Map is being used by another
task. A task is already running with an
application map. Pause the active task and call
up map view again.
No map information. No application map was
allocated to the current task. Create an application map
using an FMIS and allocate it
to the task.
The task report could not be
generated. Error during exporting.
Documentation or master data is
corrupted.
-
Cannot delete. The element to be deleted
cannot be deleted. -
Entry cannot be deleted
because it has not been
created on the terminal. Data records imported from an
FIMS cannot be deleted at a
terminal. -
Entry cannot be deleted
because of existing database
references. The data record is being used
by another data record. Allocate another entry in the
referencing data record.
Control cannot find any
counters. A few control
functions cannot be used. Do
you want to start the task
anyway? The connected implement does
not support all the required
counters. Connect an implement with
complete function scope.
GPS Signal has been lost. Poor reception. Drive to a clear area and wait
until the GPS receiver has
reception again.