CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 66 / 359

CCI.Cam
CCI.Cam
– Introduction
3
Pos : 1 /CC-I sobus/Ei nlei tung @ 8\ mod_1273561492335_6. doc @ 119978
1 Introduction
1.1 About these operating instructions
These operating instructions are intended as an introduction to the operation and
configuration of the CCI.Cam app. This app is pre-installed on your ISOBUS CCI
100/200 terminal and can only be run there. It is only with knowledge of these
operating instructions that accidental misuse of the terminal can be avoided and
fault-free operation ensured.
These operating instructions must be read and understood prior to setting up the
software to avoid problems in the application.
1.2 Reference
These operating instructions describe the CCI . Cam Version CCI.Cam v5.
To query the version number of the CCI . Cam installed on your terminal proceed as
follows:
1. Press the home key to enter the main menu.
2. Press the "Settings" button (F1) in the main menu.
3. Select the tab Info and Diagnostics .
4. In the Info and Diagnostics tab press the button "Terminal".
5. Press the "Software" button on the touchscreen .
→ The version of the
terminal software component is indicated In the
information field that is now displayed.
1.3 About CCI.Cam
CCI. Cam is used for visual implement monitoring by video camera. The app allows
the driver to keep an overview of his implement with up to 8 cameras and supports
the worker during complex working procedures.
Enhanced functions such as cyclical camera switching and flexible configuration of
the camera connections facilitates day-to-day working. The
snapshot function
allows photos to be taken and stored on a flash drive.
Pos : 3 /CC-I sobus/Si cherheit @ 8\ mod_1273562473695_6.doc @ 120017 @ 122222