CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 295 / 359

CCI.Command
– Operation
52
4.3.5.6 Set reverse gear detection
To select reverse gear detection proceed as follows:
1. Press on the "Reverse gear detection" button on the touchscreen or turn the
scroll wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Select the desired setting from the list. To do so, press on the desired button
on the touchscreen or turn the scroll wheel until the button is highlighted in
white and then press on the scroll wheel.
→ The desired setting appears in the selection window.
3. Confirm your entry with "OK".
Note
Dependent on the quality of the GPS receiver, incorrect detections can occur, e.g.
in shadowed areas at forest edges. The direction of travel can be manually
corrected at any time in the map view via button F5 (see chapter 4.4.9).