CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 235 / 359

CCI.TECU
– Troubleshooting
36
5 Troubleshooting
5.1 Terminal errors
The following overview shows possible terminal errors and how to solve them:
Error Possible cause Rectification
The terminal does not switch
on
•
Terminal is not correctly
connected
•
Check ISOBUS
connection
•
Ignition is not switched
on.
•
Start tractor.
The software of the connected
implement is not displayed
•
Bus terminator missing
•
Check resistance
•
Software is loaded,
however is not displayed
•
Check whether the
software can be
manually started from
the terminal start menu
•
Connection error when
uploading the software
•
Check physical
connection
•
Contact the implement
manufacturer's customer
service
5.2 Error messages
The following overview shows error messages in CCI.TECU, their possible cause
and how to rectify them:
Error Possible cause Rectification
Cannot delete tractor!
There is only one tractor or
you are trying to delete the
active tractor.

There is only one tractor in
the list of tractors

If you want to delete the
last tractor in the list, it is
not possible.

The selected tractor is
currently active in the TECU
main view.

Activate another tractor in
the TECU main view.
Invalid value!
Measured position exceeds
max. value.
The maximum position was not
measured during the 3-point
hitch calibration. Carry out the 3-point hitch
calibration again.
Invalid value!
Measured position below min.
value.
The minimum position was not
measured during the 3-point
hitch calibration. Carry out the 3-point hitch
calibration again.