CC-ISOBUS CCI 50 Скачать руководство пользователя страница 264

Страница: 264 / 359

CCI.Command

– Operation

4.3.2.5

Exporting field(s) in shape format

To export the selected

field(s)

, proceed as follows:

1. Connect the flash drive to the

terminal.

→ As soon as the flash drive has been identified, the export button is

available.

2. Press the "Export field(s)" (F11) button on the

touchscreen

→ The "Export data" context menu opens.

3. Select between "Current field" and "All fields". To do so, press on the button

with the desired selection or turn the scroll wheel until the button is highlighted
in white and then press on the scroll wheel.

Note

If there are lots of saved fields, the export may take some time if "All fields" is
selected.

Note

The shape data contain, in addition to the field boundaries, reference lines, worked
areas, created headlands, obstacles and reference points.

4.3.2.6

Export single field / field database

To export the current

field

or the entire field database, proceed as follows:

1. Connect the flash drive to the

terminal.

→ As soon as the flash drive has been identified, the export button is

available.

2. Press the "Export field(s)" (F11) button on the

touchscreen

→ The "Export data" context menu opens.

3. Select between "Current field" and "Field database". To do so, press on the

button with the desired selection or turn the scroll wheel until the button is
highlighted in white and then press on the scroll wheel.

Note

All field data are retained on the terminal after export.

Содержание CCI 50






































































































































































































































































































































































Результаты поиска

Содержание CCI 50

Отзывы:

Похожие инструкции для CCI 50

Бренды по названию

Популярные бренды

CC-ISOBUS CCI 50, Руководство по эксплуатации

Результаты поиска

Содержание CCI 50

Отзывы:

Похожие инструкции для CCI 50

Бренды по названию

Популярные бренды