CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 309 / 359

CCI.Command
– Operation
66
4.4.3.1 Set and position obstacle
To set a new obstacle, proceed as follows:
1. Press the "Set obstacle" button (F10) on the touchscreen .
2. In the touchscreen enter the name of the obstacle via the keyboard.
3. Confirm your entry with "OK".
→ The obstacle if first placed in the current position of the tractor and imaged
in the map view by a flashing red spot.
4. In the touchscreen press on the buttons "Left" (F3), "Right" (F4), "Up" (F5) and
"Down" (F6) to position the obstacle.
Note
Pressing the buttons causes the obstacle to be shifted 1 metre in the respective
direction.
5. To save the obstacle in the current position, leave the view "Obstacles" and
return to the normal map view.
4.4.3.2 Delete all obstacles
To delete the obstacles, proceed as follows:
1. Press the "Delete" button (F12) on the touchscreen .
2. Confirm with "OK".
Note
All obstacles of the currently used field are deleted. A selection is not possible.