background image

Contents

Installation Instructions

Page 1 of 10

© 2019 CommScope, Inc. All Rights Reserved

FST-T FLEXIBLE SERVICE TERMINAL

860653282

Rev. A

TC-1436-IP

Rev A, November 2019

www.commscope.com

1. 

About this Installation Instruction

This installation instruction describes the installation of the FST-T terminal, the full size hardened adapter and the DLX® 

adapter. The instruction will explain how to handle the terminal and factory integrated adapter drop ports, how to mount the 

terminal (hand hole and pedestal), how to connect and maintain the different adapter types (full size, DLX and HMFOC).

The FST-T is a compact sealed terminal with hardened connectivity for reliable plug-n-play distribution to customer premises. 

Featuring pre-connectorized hardened full size or DLX adapter drops, CommScope’s FST-T enables FTTH deployment 

in brown field and green field applications, with or without coax in place. Primarily designed for pedestal and hand hole 

applications, the terminal provides fast, easy network connections in space-constrained environments. The FST-T terminal is 

available with 4, 8 or 12 drops and an HMFOC cable with either no pin or pinned adapter.

1. 

About this Installation Instruction ....................................... 1

2. 

Required Tools ........................................................................ 2

3. 

Symbols In These Instructions .............................................. 2

4. 

Using Hardened Connectors and Adapters ......................... 2

5. 

Parts List .................................................................................. 2

6. 

Product Installation ................................................................ 4

7. 

Maintenance of FST-T Terminals .......................................... 8

8. 

Drop Cable Connector Cleaning Procedure ......................... 8

9. 

FST-T Adapter/Connector Cleaning Procedure ................... 9

10. Trade-marks .......................................................................... 10
11. 

Contact information ............................................................. 10

Содержание FST-T











Отзывы: