Page 10 of 10
© 2019 CommScope, Inc. All Rights Reserved
9.4.
While applying light pressure against the connector end-face, rotate the dry swab 360º three times as shown in
Figure 18.
Figure 18
9.5.
Dispose of the dry swab after use.
9.6.
When the connector end-face and adapter ferrule are clean, connect the drop cable to the optical port or
reinstall the optical port dust cap and tighten using the 216B key tool.
10.
Trade-marks
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This
document is for planning purposes only and is not intended to modify or supplement any specifications or warranties
relating to CommScope products or services. CommScope is committed to the highest standards of business integrity
and environmental sustainability, with a number of CommScope’s facilities across the globe certified in accordance with
international standards, including ISO 9001, TL 9000, and ISO 14001.
Further information regarding CommScope’s commitment can be found at
www.commscope.com/About-Us/Corporate-Responsibility-and-Sustainability.
11.
Contact information
Visit our website or contact your local CommScope representative for more information.
For technical assistance, customer service, or to report any missing/damaged parts, visit us at:
http://www.commscope.com/SupportCenter
This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com.
