Page 2 of 10
© 2019 CommScope, Inc. All Rights Reserved
2.
Required Tools
• Screw driver
• 216B key tool
• Cleaning kit (FHD-ACC-CLNKIT1)
3.
Symbols In These Instructions
The Installation Instruction uses the following icons and fonts to indicate special messages for the reader.
4.
Using Hardened Connectors and Adapters
4.1.
Hardened connectors and adapters provide sealed environmental protection for the subscriber drop cable
connector and the SC adapter mounted within the FST-T optical port. The following sections provide a
description of the connector and adapter components and provide instructions for connecting or disconnecting
the drop cable to/from the optical ports.
4.2.
The basic components of the drop cable connector are shown in Figure 1. The dust cap threads onto the
connector coupling nut. A pair of O-rings on the connector body provide a tight seal when the dust cap is in place.
Figure 1
5.
Parts List
Kit
Contents
Item #
Description
Figure
1
FST-T Terminal
2
2
Mounting Bolt
3
3
Nut
4
4
Washer
5
