CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 278 / 359

CCI.Command
– Operation
35
Guidance modes
There are 2 different guidance modes:
A-B mode
The driver sets an A-point, drives further and
sets a B-point. The system automatically
draws a line between these two points and in
addition creates parallel
lead tracks at a
distance equal to the working width
Curve mode
The driver sets an A-point, drives a desired distance
that may also contain curves and sets a B-point. The
system records the driven distance and in addition
creates parallel tracks corresponding to the working
width distance.
At the end of the recorded track, the line is extended
with a straight line. This makes possible the reliable
driving into the tracks in the headland area.
4.3.4.3 Select Guidance Mode
To select the guidance mode, proceed as follows:
1. Press on the "Guidance mode" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
→ A selection list opens.
2. Choose between "A-B mode" and "Curve mode". To do so, press on the
button on the touchscreen with the desired mode or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
→ The mode appears in the selection window.
3. Confirm your selection by pressing "OK" or pressing the button with the mode
again or by pressing the scroll wheel.