CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 234 / 359

CCI.TECU
– Operation
35
4.5.3 Documentation
With CCI.Control the CCI100/200 ISOBUS Terminal provides an app for task
management and documentation. In the running task it is mainly the process data
of ISOBUS implements that is documented.
CCI.TECU makes the following information available to CCI.Control:

Working position

Working width

Total area

Effective time

Time

Effective total distance

Total distance
Note
The scope and frequency of logging cannot be configured.
The process data made available by CCI.TECU is adequate for many applications.
However to determine the working position, CCI.TECU can only evaluate the
position of the 3-point hitch:
Working position: User input
The working position of an implement can only be
determined based on the position of the 3-point hitch,
see also chapter 4.2.4.
Possible other factors for the working position such as
the state of hydraulics or power take off cannot be
evaluated by CCI.TECU.
Working width: User input
The working width entered by you, see also chapter
4.5.2.1; the input should be as accurate as possible.)
Total area: Calculated value
The calculation of the total area (ground coverage) is
performed by multiplication of the effective total
distance by the working width of the implement.
Effective time: Measured value
The time since the start of a task, in which the
implement is located in the working position.
Time: Measured value
The total time since the start of a task.
Effective total distance: Calculated value
The distance since the start of a task, during which
the implement is in the working position.
Total distance: Calculated value
The total distance since the start of a task.