CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 271 / 359

CCI.Command
– Operation
28
Implement mountings
There are various implement mountings. Each mounting has its own coupling point
offset.
In CCI.GPS the correct distance from the tractor reference point can be input for
each implement mounting. The information is contained in the chapter Geometry
settings of the CCI.GPS operating instructions.
1B
Once you have made these settings, it is sufficient to select the currently to be
used
Connection point in CCI.Command .
2B
Repeated remeasuring is not necessary.
4.3.3.2 Select mounting
To select the currently used implement mounting, proceed as follows:
1. Press on the "Implement mounting" button on the touchscreen or turn the
scroll wheel until the button is highlighted in white and then press on the scroll
wheel.
→ The following selection list opens:
2. Select the actual implement mounting from the list. To do so, on the
touchscreen press the button with the mounting or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
→ The mounting appears in the selection window.
3. Confirm your selection by pressing "OK" or pressing the button with the
mounting again or by pressing the scroll wheel.
Note
In the geometry overview, the saved value for the currently selected implement
mounting is displayed (red number).