CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 95 / 359

CCI.Control
CCI.Control
– Introduction
6
1.3.6 Examples
Example 1:
During the harvest, a yield map was created. Based on this, a fertilisation plan is
drawn up on the PC. The FMIS creates a task based on recommended fertiliser
and position data, taking into consideration the functions of the implement. This is
saved on a flash drive and transferred to the driver, who then imports the data to
CCI.Control. While the driver drives over the field, CCI.Control controls the fertiliser
spreading based on the task and the current position information via the ISOBUS.
The section-specific fertilizer quantities are automatically set using the application
map created on the PC.
Example 2:
An easier case is that the CCI.Control documents, for example, the bale number of
a press. This information, as well as the recorded position information, can be
given to the customer in an invoice.
FMIS not available FMIS available
Non-ISOBUS-
compatible
implement
ISOBUS-
compatible
implement
Non-ISOBUS-
compatible
implement
ISOBUS-
compatible
implement
Logging of
times
● ● ● ●
Logging of
positions
●* ●* ●* ●*
Logging of
counters
-
●
-
●
Logging of
process data
- - -
●
Automatic
control of the
implement
- - -
●*
* with connected GPS
receiver
● Function available
- Function not available