CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 217 / 359

CCI.TECU
– Operation
18
4.3.3 Detailed view
The detailed view of a tractor is divided into 6 tabs: Overview, Comment, Tractor
Settings, Speed, Power take off and 3-point hitch.
The tabs Speed, Power take off and 3-point hitch are not always available:

The speed tab is only available if, in the tractor settings, the signal connector
has been selected as the signal source for the wheel or ground speed sensor.

The Power take off tab is only available if the signal connector has been
selected as the signal source for the power take off speed in the tractor settings.

The 3-point hitch tab is only available if, in the tractor settings, the signal
connector has been selected as the signal source for the 3-point hitch.
These are organised as follows:
Overview: This shows the speed settings, PTO settings and the
3-point hitch settings.
Comment: This shows a comment with a maximum of 160
characters.
Tractor settings:
This shows the tractor name and the settings for
wheel speed sensor, ground speed sensor, PTO
sensor and 3-point hitch sensor.
Speed: Shows how many pulses per 100 metres are output
by the sensor.
Power take off: This shows how many pulses are emitted by the
sensor per power take off revolution.
3-point hitch: This shows the voltage values for the maximum and
minimum position.
To switch between tabs, proceed as follows:
1. Press the corresponding tab on the touchscreen or select it using the arrow
keys (F8, F2).