CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 349 / 359

CCI.GPS
– Operation
12
4.3.2 Select baud-rate
1. To select the baud-rate, proceed as follows:
2. Press on the "Baud-Rate" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
→ The following selection list opens:
3. Select the desired baud-rate in the selection list. To do so, on the touchscreen
press on the button with the baud-rate or turn the scroll wheel until the button
is highlighted in white. The baud-rate then appears in the selection window.
4. Confirm your selection with "OK" or press once again on the baud-rate
highlighted in white.
Note
The baud-rate is automatically set if the CAN bus is selected as the GPS source.
Manual alteration is not possible.
Note
To receive GPS data from the receiver the baud-rate of the terminal and the GPS
receiver must match.