CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 302 / 359

CCI.Command
– Operation
59
4.4.1 Headland management
To change the headland management proceed as follows:
1. Press the "Headland management" button (F3) on the touchscreen .
→ Headland management opens:
Note
The selection "Circular" is only available if a field boundary has already been
created (see chapter 4.4.1).
Note
The selection "Delete headland" is only available if at least one saved headland
exists.
You have the following operating options:
Change to individual headland recording
Press the "Individual" button on the touchscreen .

The Headland recording map view opens.
You can find more detailed information about headland recording in
chapter 4.4.1.1.
Create circular headland
Delete headland