CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 303 / 359

CCI.Command
– Operation
60
4.4.1.1 Create circular headland
To create a circular (peripheral) headland, proceed as follows:
1. Press on the "Circular" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the headland width on the touchscreen using the number pad or the
slider.
3. Confirm your entry with "OK".
→ A headland with the entered width is created along the field boundary.
Note
To be able to add a headland, a field boundary must first be created (see chapter
4.4.1).
4.4.1.2 Delete headland
To delete a saved headland, proceed as follows:
1. Press on the "Delete headland" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Confirm the prompt for confirmation with "OK".
→ The headland is deleted.
Note
This function deletes all headlands saved for this field.
If a field boundary exists, a circular headland can quickly be recreated. An
individual headland must be newly driven around.