CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 33 / 359

Settings
26
Select Lighting Mode
The brightness of the display is regulated based on the lighting mode:
 In “Day” mode the value set in Day lighting is used.
 In “Night” mode the value set in Night lighting is used.
 In “Auto” mode, the display brightness switches from day mode to
night mode at the lighting threshold.
1. Press the “Lighting Mode” button
2. Select the Lighting Mode from the selection list.
3. Confirm your entry with "OK".
Enter Lighting threshold
If “Auto” lighting mode is active, the lighting mode must be set.
The lighting threshold is the switching point at which the display
brightness automatically switches between day and night mode.
The switching point can be freely selected. The value provided by the
brightness sensor is the reference variable.
 If the switching point is exceeded, day lighting is activated.
 If the switching point is exceeded, night lighting is activated.
1. Press the “Lighting threshold” button
2. Enter the value for the switching point.
3. Confirm your entry with "OK".
4. Activate “Auto” lighting mode.